Expert Answers about Gulf Stream Visa Travel Trailer

• What Hitch do You Recommend for My 2018 Ford F-150?
• If you do not have a factory hitch on your 2018 Ford F-150, I recommend the Curt Trailer Hitch Receiver - Custom Fit - 2" # C86HR. Not only does this hitch come with a 6,000 pound towing capacity and a 900 pound maximum tongue weight, it also comes with a superior gloss outer coating over the base coat that will provide more resistance against rust and corrosion that Draw-Tite and etrailer alternatives. Also, the installation includes a bolt-on process that only takes about 40 minutes to...
  view full answer...


• Help Rewiring 7-Way of 2013 Visa by Golfstream that Was Removed
• The wiring colors shown in the picture you submitted don't match totally with industry standard 7-way wiring colors but I can still help you get them connected where they belong. Most likely it looks like the bundles red and orange wires are 12 volt accessory wires and the thicker white wire is the ground but the safest way to determine everything will be to use a jumper wire from a 12 volt source like a vehicle battery positive post attached to each circuit. This will tell you which circuit...
  view full answer...


• Power Wiring Diagram Explanation for iRV Stereo 292-101809
• For the iRV stereo part # 292-101809 the yellow wire runs to the vehicle battery, the red runs to a circuit that sees voltage only when the vehicle is turned on (think of this as the activation circuit to turn it on), blue runs typically to a power antenna to tell it to activate (can also be used to activate an amp), and black is ground. If you do not have a power antenna or any other circuit that you need to also be powered on when the key is on you can leave the blue wire disconnected.
  view full answer...


• How to Determine if Lippert Axle Riser Kit Will Fit
• I can tell you how to go about determining if a Lippert Axle Riser Kit will fit your trailer, but these are universal fits, and we don't have any way of knowing what specific axles are on any year, make, or model of trailer. So in order to determine a fit, you'll have to take a look at your axle. The axle will need to be a Lippert 3,500 lb torsion axle, and it will need to be square shaped. The shape you will be able to see visibly and there should be a tag or sticker on the axle itself...
  view full answer...


• How Long is the Shaft of the Replacement Plastic Operator Knob for Ventadome
• The shaft of the # BVD0421-15 is 1/2" long.
  view full answer...